What are the floor protection films? Which is better for the floor protection film?

As mentioned in the previous article, it is common to say that wood flooring for a long time needs to be waxed if it is to be maintained. Another way to protect the floor is to lay a protective film on the floor of the home, which can effectively reduce the flaws. Have you heard of the home improvement floor protection film? This is a new type of home improvement floor material, then the next small series will take everyone to look at the relevant content of the home improvement floor protection film .

First, the entrance door protection

The entry of various decoration materials and the cleaning of various construction and decoration garbage will pass through the entrance door. During the handling process, the chances of bumping and friction with the entrance door are greatly increased. Therefore, the first one needs to be done. The place where good finished products are protected is our entry door. Recommendation: The entrance door must be protected before the renovation starts until the furniture enters the site! For this, the finished protective film can be used to wrap the door.

Second, the choice of home improvement floor protection film

1. The home improvement floor protection film can make our decoration masters feel more comfortable and secure construction, so that our floor tiles and marbles can be better protected and improve the quality and reputation of our decoration work.

2, home improvement floor protective film is made of pvc and knitted cotton, wear-resistant, waterproof and anti-paint performance is good, it will protect our wall surface, so that it is not scratched.

3, the surface of the home floor protection film pvc has anti-slip, fire retardant function, can make the decoration site more secure, and provide a guarantee for your decoration.

4, knitted cotton is industrial cotton, can be recycled, very conducive to environmental protection

Third, the protective film paste method

The paving of tiles and floors is also part of the basic decoration. It is often found that there is no finished product protection work during and after the construction of the tiles. The specific performances are: the seams of the tiles are laid, the tiles are laid on the tiles, and the floor is stacked. Miscellaneous and freshly tiled tiles are walked on the treads, floor tiles, and the floor is not covered with a finished protective film. These will affect the paving effect of the tiles and cause the construction quality of the tiles.

Fourth, the proposal

1. Wall floor tiles. Do not rush to joint when the paving is not dry, so as to avoid artificially causing the tiles to be loose and uneven, which will affect the construction effect.

2, before the ground tile is dry, do not walk around, stacking debris, so as not to cause the tiles to loose, uneven.

3. After the floor tiles are laid, cover the brick surface with a finished protective film. It can prevent the sand from being damaged when the decoration is finished, and can also effectively prevent the colored liquid such as paint and paint from dripping on the brick surface, causing ground pollution. As mentioned above, the protection of finished products in construction is a very meticulous work. Now only a few relatively important aspects are listed, to be added.

How about, I read the relevant introduction to the floor protective film, and I have learned a lot about the floor protection film. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.